HomeTopicsMeasurement (Grade 10)

Measurement

Grade 10 CAPS: volume and surface area of prisms, cylinders, cones, pyramids and spheres, the effect of scaling a solid, and composite solids.

2-hour study route
CAPS alignedGrade 10Paper 2Interactive notes
Start here

Measurement — what matters

Use this map before the guided course. It separates core knowledge from exam habits.

G10

You must know

  • Volume and surface area of prisms and cylinders
  • Spheres, right pyramids and right cones
  • Effect of multiplying a dimension by k
  • Composite solids

Exam / assessment focus

  • Volume uses perpendicular height; curved surface uses slant height
  • Count only exposed surfaces
  • Convert diameter to radius before substituting
Built from CAPS and the DBE Examination Guidelines. Practice questions are original unless a source is named.
Guided Course Slides
Quick checks: 0/0
Grade 10 CAPS Mathematics

Measurement

Volume and surface area of prisms, cylinders, cones, pyramids and spheres, what happens when you scale a solid, and solids built from two or three parts. Work through the slides in order, then move to the Mastery Bank.

Your 2-hour learning route

Recognise the solid, label it, then choose the formula.

20
min
1. Prisms and cylinders

Revision: volume is base area × height; surface area adds every face.

30
min
2. Cones, pyramids, spheres

New this year: the \(\tfrac13\) solids and the sphere, with slant height for surface area.

20
min
3. Scale factors

Multiply one dimension, or every length, by \(k\).

30
min
4. Composite solids

Add volumes; count only the surfaces you can touch.

20
min
5. Practise

Mastery Bank, then the self-test.

Study rule
Before writing any formula, sketch the solid and mark \(r\), \(h\) and any slant height. Most lost marks come from putting the wrong length into a correct formula.

What CAPS actually asks in Grade 10

Measurement, Term 3.

  1. 1

    Revise the volume and surface area of right prisms and cylinders.

  2. 2

    Study the effect on volume and surface area when multiplying any dimension by a constant factor \(k\).

  3. 3

    Calculate the volume and surface area of spheres, right pyramids and right cones.

  4. 4

    Solve problems with composite solids made from these shapes.

Scope
CAPS limits pyramid bases to a square or an equilateral triangle. Euclidean Geometry and Measurement together carry 30±3 of the 100 marks on Paper 2.

See the solid before using the formula

Split the object into standard solids and mark the faces you can touch.

Composite solid made from a cylinder and hemisphereA hemisphere of radius r sits on a cylinder of the same radius. The internal circular join is shaded and labelled not exposed.rhinternal join — not exposedhemispherecylinder
Both parts use the same radius. Add their volumes. For the outside surface, do not count the circle where the hemisphere and cylinder are joined.
Volume

\[V=\pi r^2h+\tfrac{2}{3}\pi r^3\]

Add the volume of each part.

Exposed surface area

\[SA=2\pi r^2+2\pi rh+\pi r^2\]

Curved hemisphere + curved cylinder + bottom circle.

Method
Name each standard solid, mark joined faces, use one unit for every length, and round only at the end.

1. Prisms and cylinders

A prism has the same cross-section all the way through.

Right prism

\[V=(\text{area of base})\times h\]

Surface area: add the areas of all the faces.

Cylinder

\[V=\pi r^2h\]

\[SA=2\pi r^2+2\pi rh\]

rh
Use the radius \(r\), not the diameter. The height \(h\) is perpendicular to the circular base.

Worked example: a closed cylinder

Volume and total surface area from the same two lengths.

Volume and surface area Level 1–2

A closed cylinder has radius \(4\) cm and height \(10\) cm. Find its volume and total surface area.

Show solution
  1. 1Volume: \(V\) \(=\pi(4)^2(10)\) \(=160\pi\) \(\approx\boxed{502{,}65\text{ cm}^3}\).
  2. 2Surface area: \(SA\) \(=2\pi(4)^2+2\pi(4)(10)\) \(=32\pi+80\pi\) \(=112\pi\) \(\approx\boxed{351{,}86\text{ cm}^2}\).
  3. 3Units: cm³ for volume, cm² for area.
Common mistake
Writing \(\pi d^2h\). The formula needs the radius: halve a given diameter first.
Quick check: prisms and cylinders

A cylinder has diameter \(10\) cm and height \(4\) cm. Which calculation gives its volume?

Which surfaces make up the total surface area of a closed cylinder?

2. Cones, pyramids and spheres

New this year. Volume uses the perpendicular height; surface area uses the slant height.

Right cone

\[V=\tfrac13\pi r^2h\]

\[SA=\pi r^2+\pi r\ell\]

Right pyramid

\[V=\tfrac13(\text{area of base})\times h\]

SA = base + the triangular faces.

Sphere

\[V=\tfrac43\pi r^3\]

\[SA=4\pi r^2\]

Right cone with radius, perpendicular height and slant heightA right cone. The perpendicular height h runs from the apex straight down to the centre of the base, the radius r runs from the centre to the edge, and the slant height runs down the sloping side. Together they form a right-angled triangle.hrℓ
\(h\), \(r\) and the slant height \(\ell\) form a right-angled triangle, so \(\ell^2=r^2+h^2\).

Worked example: cone surface area

Find the slant height before you use \(\pi r\ell\).

Total surface area Level 2

A cone has radius \(5\) cm and perpendicular height \(12\) cm. Find its total surface area.

Show solution
  1. 1Slant height: \(\ell^2\) \(=r^2+h^2\) \(=25+144\) \(=169\) \(\Rightarrow\ell=13\) cm.
  2. 2\(\begin{aligned}[t]SA &=\pi r^2+\pi r\ell\\&=\pi(5)^2+\pi(5)(13)\\&=25\pi+65\pi=90\pi\\&\approx\boxed{282{,}74\text{ cm}^2}.\end{aligned}\)
Common mistake
Using \(h=12\) in \(\pi r\ell\) gives \(60\pi\) for the curved surface instead of \(65\pi\).

Worked example: a square pyramid

The volume needs \(h\); each face needs the slant height.

Right square pyramid with perpendicular height and slant heightA right pyramid on a square base of edge 6. The perpendicular height h drops from the apex to the centre of the base. The slant height of 5 runs from the apex to the midpoint of a base edge. Half the base edge, 3, joins the centre to that midpoint, making a right-angled triangle with sides 3, h and 5.h53base edge 6
Half the base edge, the perpendicular height and the slant height form a right-angled triangle: \(3\), \(h\) and \(5\).
Volume and surface area Level 2–3

A right square pyramid has base edge \(6\) cm and slant height \(5\) cm. Find (a) its volume and (b) its total surface area.

Show solution
  1. 1\(h^2=5^2-3^2=16\Rightarrow h=4\) cm.
  2. 2(a) \(V=\tfrac13(6^2)(4)=\boxed{48\text{ cm}^3}\).
  3. 3(b) Each face: \(\tfrac12(6)(5)=15\) cm². \(SA=36+4(15)=\boxed{96\text{ cm}^2}\).
Quick check: cones and pyramids

A cone has radius \(6\) and perpendicular height \(8\). What is its slant height?

Which length goes into the cone's curved surface area \(\pi r\times\square\)?

3. Scale factors

Multiply one dimension, or every length, by a constant \(k\).

Every length × \(k\)

Lengths \(\times k\), surface area \(\times k^2\), volume \(\times k^3\).

A model enlarged by \(3\): area \(\times9\), volume \(\times27\).

One dimension × \(k\)

Volume changes by \(k\) to the power that dimension has in the formula.

Surface area must be recalculated.

Only one dimension changes Level 2–3

The cylinder from slide 6 (\(r=4\), \(h=10\), \(V=160\pi\), \(SA=112\pi\)). Find the new volume if (a) only the height is tripled, (b) only the radius is doubled, and (c) the new surface area in (a).

Show solution
  1. 1(a) \(V\) \(=\pi(4)^2(30)\) \(=480\pi\) \(=3\times160\pi\): volume \(\times3\).
  2. 2(b) \(V\) \(=\pi(8)^2(10)\) \(=640\pi\) \(=4\times160\pi\): volume \(\times2^2\), because \(r\) is squared.
  3. 3(c) \(SA\) \(=2\pi(4)^2+2\pi(4)(30)\) \(=32\pi+240\pi\) \(=272\pi\), not \(3\times112\pi=336\pi\): the two circles did not change.
Quick check: scale factors

Every length of a solid is multiplied by \(3\). Its volume is multiplied by

Only the height of a cylinder is doubled. Its volume is multiplied by

4. Composite solids

Treat the object as standard solids joined together.

r
Cylinder + hemisphere: add the volumes; for surface area count only the exposed surfaces.
  1. 1

    Identify each standard solid.

  2. 2

    Write the formula for each measure you need.

  3. 3

    Use the shared lengths carefully.

  4. 4

    Add volumes. For surface area, leave out the joined faces.

Worked example: a water tank

Cylinder plus hemisphere, same radius.

Composite volume Level 2–3

A water tank is a cylinder of radius \(2\) m and height \(5\) m with a hemisphere of the same radius on top. Find the total volume.

Show solution
  1. 1Cylinder: \(V=\pi(2)^2(5)=20\pi\).
  2. 2Hemisphere: \(\tfrac12\times\tfrac43\pi(2)^3=\tfrac{16}{3}\pi\).
  3. 3Total: \(20\pi+\tfrac{16}{3}\pi=\tfrac{76}{3}\pi\approx\boxed{79{,}59\text{ m}^3}\).

Worked example: three solids in one

CAPS clarification example.

Volume and surface area Level 3–4

The height of a cylinder is \(10\) cm and the radius of its base is \(2\) cm. A hemisphere is attached to one end and a cone of height \(2\) cm to the other end. Calculate the volume and surface area of the solid, correct to the nearest cm³ and cm².

Show solution
  1. 1Volume: \(\pi(2)^2(10)+\tfrac23\pi(2)^3\) \(+\tfrac13\pi(2)^2(2)\) \(=40\pi+\tfrac{16}{3}\pi+\tfrac{8}{3}\pi\) \(=48\pi\) \(\approx\boxed{151\text{ cm}^3}\).
  2. 2Cone slant height: \(\ell=\sqrt{2^2+2^2}=2\sqrt2\) cm.
  3. 3Exposed surfaces: curved cylinder \(2\pi(2)(10)=40\pi\), curved hemisphere \(2\pi(2)^2=8\pi\), curved cone \(\pi(2)(2\sqrt2)=4\sqrt2\pi\). Both circular ends are joined, so they are not counted.
  4. 4\(SA=48\pi+4\sqrt2\pi\approx\boxed{169\text{ cm}^2}\).

Mistake clinic: repair the exact error

Each of these turns a correct method into a wrong answer.

Radius

Diameter in the formula

Halve a given diameter before substituting. \(\pi d^2h\) is four times too big.

Heights

\(h\) and \(\ell\) swapped

Volume uses the perpendicular height; the curved surface of a cone (and the faces of a pyramid) use the slant height.

Composites

Counting a hidden face

A face where two solids are joined is inside the object: leave it out of the surface area.

Units

Mixed units

Convert every length to the same unit first; area is in square units and volume in cubic units.

Rounding

Rounding too early

Keep \(\pi\) and surds exact until the last line, then round as the question asks.

Try these

Work on paper, then reveal.

Q1. A sphere has radius \(3\) cm. Find its volume.

Show answer

\(\begin{aligned}[t]V &=\tfrac43\pi(3)^3=36\pi\\&\approx\boxed{113{,}10\text{ cm}^3}.\end{aligned}\)

Q2. A cone has radius \(5\) cm and perpendicular height \(12\) cm. Find its volume.

Show answer

\(\begin{aligned}[t]V &=\tfrac13\pi(5)^2(12)\\&=100\pi\approx\boxed{314{,}16\text{ cm}^3}.\end{aligned}\)

Q3. Every length of a solid is doubled. By what factor does its surface area change? Its volume?

Show answer

Surface area \(\times2^2=\boxed{4}\); volume \(\times2^3=\boxed{8}\).

You now have the route.

Practise in this order.

1. Mastery Bank

Exam-style Grade 10 measurement questions with full memos.

Open the Mastery Bank →

2. Test Your Knowledge

An auto-marked self-check without notes.

Take the test →

3. Euclidean Geometry

The other half of this Paper 2 section.

Continue →

1 / 19

Practise in the right order

The core teaching is above. These are the next steps, not a replacement for it.

01
Built-in practice
Measurement Grade 10 Mastery Bank

Exam-style questions by cognitive level, each with a full memo.

Start after the slides
Open Mastery Bank
02
Built-in check
Test Your Knowledge

An auto-marked self-check to find the one skill to practise next.

Then target one weak skill
Test Your Knowledge
DBE
Official free books
DBE Grade 10 Textbooks

Official state-owned learner books and teacher support for Grade 10 Mathematics.

Official • free access
Open DBE Books

Frequently Asked Questions

Straight answers to common Grade 10 CAPS questions about measurement.

What Measurement does CAPS require in Grade 10?

Revise the volume and surface area of right prisms and cylinders, study the effect on volume and surface area of multiplying any dimension by a constant factor k, and calculate the volume and surface area of spheres, right pyramids and right cones, including composite solids. CAPS limits pyramid bases to a square or an equilateral triangle.

Which height goes into the cone formulas?

The volume uses the perpendicular height h. The curved surface area uses the slant height, which you find from the radius and the height with the Theorem of Pythagoras.

What happens to the volume if every length is doubled?

The volume is multiplied by 8 (2 cubed) and the surface area by 4 (2 squared). If only one dimension is doubled, the change depends on the power of that dimension in the formula.

How many marks is Measurement worth in Grade 10?

Euclidean Geometry and Measurement together carry 30 plus or minus 3 of the 100 marks on Grade 10 Paper 2.