HomeTopicsMeasurement (Grade 11)

Measurement

Grade 11 CAPS: revise Grade 10 measurement and sharpen the exam habits — the right height, the right radius, scale factors and exposed surfaces.

2-hour study route
CAPS alignedGrade 11Paper 2Interactive notes
Start here

Measurement — what matters

Use this map before the guided course. It separates core knowledge from exam habits.

G11

You must know

  • Surface area and volume
  • Prisms, cylinders, cones, pyramids and spheres
  • Scale factors k, k² and k³
  • Composite solids

Exam / assessment focus

  • Volume uses perpendicular height
  • Surface area counts exposed surfaces only
  • Convert diameter to radius before substituting
Built from CAPS and the DBE Examination Guidelines. Practice questions are original unless a source is named.
Guided Course Slides
Quick checks: 0/0
Grade 11 CAPS Mathematics

Measurement

Grade 11 revises the Grade 10 work: choose the right formula, put the right length into it, scale solids and count only exposed surfaces. Work through the slides in order, then move to the Mastery Bank.

Your 2-hour learning route

Revise fast, then practise the traps.

20
min
1. Recognise the solid

Prism, cylinder, cone, pyramid, sphere or a combination.

30
min
2. Volume

Cone, sphere and composite volumes with the right height.

20
min
3. Scale factors

What \(k\) does to lengths, areas and volumes.

30
min
4. Surface area

Slant height, exposed faces, hidden joins.

20
min
5. Practise

Mastery Bank, then the self-test.

What CAPS actually asks in Grade 11

Measurement, Term 3.

  1. 1

    Revise the Grade 10 work: volume and surface area of right prisms, cylinders, spheres, right pyramids and right cones, composite solids, and the effect of multiplying dimensions by a constant factor \(k\).

Why it still matters
Euclidean Geometry and Measurement together carry 50±3 of the 150 marks on Paper 2. In Grade 12, measurement returns inside calculus optimisation and 2D/3D trigonometry.

What you need to recognise

Identify the solid and the quantity before choosing a formula.

Prism / cylinder

Same cross-section all the way through.

\[V=A_{\text{base}}\times h\]

Pyramid / cone

Comes to one apex.

\[V=\tfrac13A_{\text{base}}\times h\]

Sphere

\[V=\tfrac43\pi r^3\qquad SA=4\pi r^2\]

Cylinder

\[V=\pi r^2h\qquad SA=2\pi r^2+2\pi rh\]

See the dimensions before calculating

The height of a cone is the perpendicular height, not the sloping edge.

Cylinder, cone and sphere measurement diagramsLabelled cylinder and cone with radius and perpendicular height, and a sphere with radius.rhrhrcylinderconesphere
Radius and perpendicular height on a cylinder and cone, and the radius of a sphere.
Common mistake
Using the slant height in a volume formula. Volume always uses the perpendicular height.

Worked example: cone volume

Identify, substitute, check the units.

Cone Level 1–2

A cone has radius \(6\) cm and perpendicular height \(10\) cm. Calculate its volume.

Show solution
  1. 1Cone: \(V=\tfrac13\pi r^2h=\tfrac13\pi(6)^2(10)\).
  2. 2\(V=120\pi\approx\boxed{376{,}99\text{ cm}^3}\). Volume is in cubic units.

Worked example: sphere from a diameter

Halve the diameter first.

Sphere Level 2

A spherical tank has diameter \(2{,}4\) m. Find its volume.

Show solution
  1. 1Radius: \(r=1{,}2\) m.
  2. 2\(V=\tfrac43\pi(1{,}2)^3\approx\boxed{7{,}24\text{ m}^3}\).
Quick check: volume

A cone has radius \(3\), perpendicular height \(4\) and slant height \(5\). Which calculation gives its volume?

A ball has diameter \(14\) cm. Which radius goes into \(\tfrac43\pi r^3\)?

Scale factor: the fastest marks

If every length is multiplied by \(k\)…

Lengths

\[\times k\]

Areas

\[\times k^2\]

Volumes

\[\times k^3\]

One dimension only
If only one length changes, the volume changes by \(k\) to the power that length has in the formula (doubling \(r\) in \(\pi r^2h\) gives \(\times4\)). Recalculate surface area: it does not scale by a single power.

Worked example: a composite volume

Cylinder plus hemisphere of the same radius.

Composite solid Level 2–3

A decorative solid is a cylinder of radius \(3\) cm and height \(8\) cm with a hemisphere of the same radius on top. Find the total volume.

Show solution
  1. 1Cylinder: \(V=\pi(3)^2(8)=72\pi\).
  2. 2Hemisphere: \(\tfrac12\times\tfrac43\pi(3)^3=18\pi\).
  3. 3Total: \(72\pi+18\pi\) \(=90\pi\) \(\approx\boxed{282{,}74\text{ cm}^3}\).

Surface area: count only exposed surfaces

Cross out faces that touch another solid before you add.

Cone curved surface

\[A=\pi r\ell\]

\(\ell\) is the slant height: \(\ell^2=r^2+h^2\).

Cylinder curved surface

\[A=2\pi rh\]

Hemisphere curved surface

\[A=2\pi r^2\]

Worked example: exposed surface area

The solid from the previous worked example.

Exposed surface area Level 3

Find the external surface area of the cylinder-and-hemisphere solid (\(r=3\) cm, cylinder height \(8\) cm).

Show solution
  1. 1Curved hemisphere: \(2\pi(3)^2=18\pi\).
  2. 2Curved cylinder: \(2\pi(3)(8)=48\pi\).
  3. 3Bottom circle: \(\pi(3)^2=9\pi\). The top circle is the join, so it is not counted.
  4. 4\(\begin{aligned}[t]SA &=18\pi+48\pi+9\pi\\&=75\pi\approx\boxed{235{,}62\text{ cm}^2}.\end{aligned}\)
Common mistake
Adding the full closed-cylinder formula \(2\pi r^2+2\pi rh\). That counts the hidden top circle.
Quick check: scale factors and surface area

A cube's side length triples. Its volume is multiplied by

A cone sits exactly on top of a cylinder of the same radius. Which surfaces make up the external surface area?

Try these

Work on paper, then reveal.

Q1. A sphere has radius \(5\) cm. Find its surface area.

Show answer

\(4\pi(5)^2=\boxed{100\pi\text{ cm}^2}\approx314{,}16\) cm².

Q2. A cone has diameter \(14\) cm. What is its radius?

Show answer

\(\boxed{7}\) cm.

Q3. A rectangular prism is \(4\times3\times8\) cm. Find its volume.

Show answer

\(\boxed{96\text{ cm}^3}\).

Your Paper 2 checklist

Run this before every measurement answer.

Solid

Identify it first

Name the solid before choosing a formula.

Radius

Diameter → radius

Halve every given diameter.

Heights

Perpendicular for volume

Use the slant height only where a surface-area formula needs it.

Units

Square and cubic

Area in square units, volume in cubic units.

Composites

Exposed faces only

Add or subtract solids, and count only surfaces you can touch.

You now have the route.

Practise in this order.

1. Mastery Bank

Exam-style Grade 11 measurement questions with full memos.

Open the Mastery Bank →

2. Test Your Knowledge

An auto-marked self-check without notes.

Take the test →

3. Euclidean Geometry

The other half of this Paper 2 section.

Continue →

1 / 16

Practise in the right order

The core teaching is above. These are the next steps, not a replacement for it.

01
Built-in practice
Measurement Grade 11 Mastery Bank

Exam-style questions by cognitive level, each with a full memo.

Start after the slides
Open Mastery Bank
02
Built-in check
Test Your Knowledge

An auto-marked self-check to find the one skill to practise next.

Then target one weak skill
Test Your Knowledge
DBE
Official free books
DBE Grade 11 Textbooks

Official state-owned learner books and teacher support for Grade 11 Mathematics.

Official • free access
Open DBE Books

Frequently Asked Questions

Straight answers to common Grade 11 CAPS questions about measurement.

Is there new Measurement content in Grade 11?

No. CAPS says to revise the Grade 10 work: volume and surface area of right prisms, cylinders, spheres, right pyramids and right cones, composite solids, and the effect of multiplying dimensions by a constant factor k.

How many marks is Measurement worth in Grade 11?

Euclidean Geometry and Measurement together carry 50 plus or minus 3 of the 150 marks on Grade 11 Paper 2.

Does Measurement come back in Grade 12?

It is not a separate Grade 12 topic. The 2021 Examination Guidelines say measurement can be tested inside calculus optimisation and two- and three-dimensional trigonometry.

Which faces count in the surface area of a composite solid?

Only the faces you can touch from outside. A face where two solids are joined is inside the object and is left out.